If you have a parking lot, you need to know that ADA compliance is required. If your pavement markings don’t comply with the Americans with Disabilities Act (ADA), then it’s time to take action! This article from ABC Asphalt, Inc. is dedicated to updating your parking lot striping and bringing it up to ADA standards.
What’s It All About?
The Americans with Disabilities Act (ADA) is a civil rights law that prevents discrimination against people with disabilities in all areas of public life. These include jobs, schools, transportation, and public and private places open to the general public.
By refusing to comply with ADA standards, businesses can face lawsuits from individuals who have been discriminated against.
One area of public life where compliance with ADA standards is critical is parking lots. In this article, we’ll help you understand the ADA’s requirements for parking lot striping. We’ll also uncover some tips on how to redo your parking lot in compliance with these standards.
When Will My Parking Lot Need New Striping?
The response to that question varies according to circumstance, including how often you resurface your lot and what type of material you use. When the time comes to redo parking lot striping in compliance with ADA standards, don’t hesitate to call ABC Asphalt for all of your needs!
It’s a general rule to stripe parking lots every 1 or 2 years. We recommend you inspect your parking lot striping at least every 12 months, 18 months, or 24 months. This way, you’ll catch any damages before they become more significant problems.
How to Design Smartly for ADA Compliance
Every parking lot striping project aims to design a layout that makes it easy for drivers and pedestrians to get in and out. When planning your parking lot striping, keep these tips in mind:
- Make sure the width of your parking lot striping is at least 5 feet since it can legally be no less. This allows enough room for a wheelchair to make its way through easily and safely.
- Include clear signs to inform pedestrians and drivers about where they should enter, exit, or park.
- Signs should show that your lot offers accessible and van-accessible parking spaces and be placed in a spot easily visible from the street.
- Accessible parking should be located as close to the entrance of the building as possible.
- Your parking lot striping should be neat, tidy, and free of any obstacles.
- Be sure to keep all pedestrian walkways clear and well-marked!
- If you include curbs in your lot, ensure they are at a proper slope and provide a curb ramp.
- Your curb ramps should be at least 36 inches wide and have a slope of no more than 1 inch per foot.
Designing your parking lot can be a bit tricky. Still, you can create an accessible parking area that works for everyone with the right expertise.
When it comes to redoing your lot striping in compliance with ADA policies, there is no better place to go than ABC Asphalt Inc.! The friendly staff at our company in Denver, CO, has years of experience completing these jobs.